Klein-tools DTL302 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
F. USB Port / External Power
USB input jack
NOTE: Also used for AC power adapter.
G. T1/T2 T1-T2
While displaying T1 in the primary display press to scroll through
T2 or the internal temperature of the meter.
Press and Hold to change primary display to temperature
differential (T1-T2).
While displaying (T1-T2) in the primary display a quick press will
scroll through T1, T2, or the internal temperature of the meter in
the lower display
H. Hold °C/°F/K (
)
Press to freeze or release the displayed readings.
Press and Hold for more than 1 second to switch between Celsius
(°C), Fahrenheit (°F), and Kelvin (K).
The
function is activated in the “
RECALL
” and “
SETUP
modes only.
I. Logging Clear (Enter)
Press to start or stop logging.
Press and Hold for more than 1 second to clear logged readings.
To clear logged data press and hold until
appears in the
lower display. To execute the clear press and hold until
appears.
The “
ENTER
” function is activated in the “
SETUP
” mode only.
DISPLAY
1
2 3 4 5
6 7
12
8
9
10
11
1. Primary Display:
T1-T2 reading.
2. TYPE KJET:
Type of thermocouple.
3. SETUP:
Setup is in progress.
4. RECALL:
The logged readings are displayed.
5. OFFSET:
The thermocouple measurement includes an offset.
6. HOLD:
The display readings do not change.
7. LOW BATTERY:
Replace batteries.
8. USB:
The thermometer is connected to a PC via USB interface port.
9. LOG:
Readings are being logged.
10. °C,°F, K:
Temperature units.
11. Secondary Display:
Internal temperature of the thermometer,
MEMORY
,
MIN
,
MAX
,
AVG
, and
T1
or
T2
reading. Shows the
memory location initially when a logged reading is recalled.
12. Time Display:
24-hour clock, shows the INTERVAL length in
SETUP
.
Shows elapsed time when AVG is on or before clock has been set.
Shows the memory time later on when a logged reading is recalled.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments